Match the sample to the supplied product
Look for a product designation, mesh size, bar diameter, material system and batch or sample identifier. Where these are missing from a cover page, ask for the full report and the supplier’s product-to-report mapping. A report for another mesh construction should not be treated as equivalent without a justified connection.
Check that the report is complete
Confirm the issuing organization, report reference, date, number of pages and any stated limitations. A cover can establish identity but may contain no results. For a multi-page report, obtain the pages containing the methods, specimen description, results and conclusions required by the project.
Keep directions and units explicit
For a bidirectional grid, identify which direction was tested and whether the reported quantity describes a reinforcing element, a junction or the grid. Stress, force and stiffness have different units. A tensile value alone does not describe the full behavior of an assembled mesh.
Connect the test method with the acceptance requirement
Ask why the chosen method is relevant to the product and intended use. The published ISO grid-test reference is one useful starting point, but merely naming it is not a test result. The purchasing specification should identify the evidence and acceptance criteria the project actually requires.
Review the system as well as the mesh
In a strengthening or repair application, the surrounding matrix, substrate and connection details can be part of the assessment. The mesh report should be considered alongside the approved system documentation and design, rather than being used as evidence for an untested combination.
What Yuanda currently publishes
The official company gallery provides the cover of CTC report WT2025B03C01168 for glass fiber composite reinforcement mesh. This website reproduces that available scan and labels it as a cover. Full results and grade-specific data should be requested for a documented project review; they are not inferred from the laboratory name or the cover image.
Sources & further reading
These publisher resources support the terminology and scope distinctions in this guide. They are independent references, not Yuanda certificates.
Browse the technical reference library ↗Source review: 10 November 2026. Consult the publisher for the full document and any subsequent revisions.
Published Yuanda product reference
The epoxy resin mesh product page lists grid sizes from 50 × 50 mm to 300 × 300 mm, with selected bar diameters from 2.5 to 10 mm and custom widths of 300–3,000 mm. Compare the exact listed combinations and review available documents.